Is there a point already?
Wellpoint Pump Installation South Africa is what turns a sunk point into running water. The pump has to match the depth, the yield and what the water is for, and getting that wrong is the most common reason a new point disappoints. Compare supply and fit quotes from providers who cover your area.
Get pump supply and fit quotes for your point.
Get the Best QuoteWhat the Installation Covers
- Sizing. Matching flow and head to the point's yield and the run to the taps.
- The pump. A surface jet or centrifugal unit for a shallow point.
- Suction side. Pipe, foot valve and a priming point, kept as short as it can be.
- Delivery side. Non return valve, pressure switch and the line to the garden or tank.
- Electrical. A weatherproof isolator and an earthed, protected supply.
- Commissioning. Priming, running it up and measuring what it actually delivers.
Choosing the Pump
- Depth to water. Over about seven metres a surface pump starts to struggle.
- Yield of the point. A pump bigger than the point will suck it dry and air lock.
- What it feeds. Sprinklers want pressure; filling a tank wants flow.
- Jet or centrifugal. A jet pump handles more suction lift; centrifugal is simpler.
- Build. Cast iron bodies outlast plastic ones on gritty water.
- Automatic or manual. A pressure switch and vessel make it behave like mains.
Protecting It
- Dry run protection. The cheapest insurance there is on a shallow point.
- A strainer. Keeps the sand that every point produces out of the impeller.
- Shade and cover. Sun and rain shorten the life of a surface pump.
- Correct priming. Running dry once can be the end of a mechanical seal.
- Non return valve. Stops the column draining back and losing the prime.
Wellpoint Pump Installation Prices
Ballpark pump supply and fit figures so you can check a quotation.
| Item | Ballpark price |
|---|---|
| 0.37 kW surface pump, supplied and fitted | R3,200 - R6,500 |
| 0.75 kW jet pump, supplied and fitted | R4,800 - R9,500 |
| 1.1 kW jet pump, supplied and fitted | R6,500 - R13,000 |
| Cast iron pump, domestic, fitted | R7,500 - R16,000 |
| Pressure switch and vessel added | R1,800 - R5,500 |
| Dry run protection fitted | R950 - R3,800 |
| Electrical isolator and connection | R1,200 - R3,500 |
| Pump house or cover, built | R2,500 - R9,000 |
Prices JUST UPDATED. Ballpark figures, rounded, excluding VAT. They reflect typical South African wellpoint, pump and water treatment rates. They are not our prices or quotations, and no provider is bound by them. Confirm what each quotation includes, such as travel, the depth allowed for, the dry hole fee, pipework and minimum callout fees.
Have the pump sized to your point rather than guessed at.
Get the Best QuoteWhat Affects the Price
- Pump rating. Kilowatts and build quality are most of the price.
- Depth to water. Deeper suction needs a jet pump rather than the cheapest option.
- Pressure needed. Sprinklers and a long run upward both call for more.
- Electrical work. A new circuit costs far more than an existing plug point.
- Automation. A pressure vessel and switch add parts and setup time.
- Housing. A built cover or pump house is a separate trade.
What to Include in Your Request
- The point's depth. Standing water level and total depth if you have them.
- The yield. Litres an hour, from the installer's test.
- What it must feed. Sprinklers, a tank, a pool or indoor plumbing.
- The distance and the rise. Metres along the ground and metres upward.
- Power at the point. Existing plug, or nothing there at all.
- Whether you want it automatic. On demand, or switched by hand.
Before the Pump Is Ordered
- Size to the point, not the garden. A pump that outruns the yield fails early.
- Keep the suction run short. Every metre sideways costs you lift.
- Fit dry run protection now. It costs less than the first seal replacement.
- Ask about spares. A pump nobody stocks parts for is a short term pump.
- Check the warranty terms. Sandy water voids some of them outright.
- Plan the electrics properly. An extension lead to a pump is not a connection.
Wellpoint Pump Installation FAQs
What size pump does a wellpoint need?
Most domestic points run on 0.37 to 1.1 kilowatts. The right figure comes from three numbers: how far the pump has to lift the water, how far it has to push it, and how many litres an hour the point gives. A pump sized above the point's yield will draw air and damage itself.
Why can a surface pump only lift water seven metres?
It is not pushing the water up, it is lowering the pressure so the atmosphere pushes it. That gives a theoretical ten metres and rather less in practice once you allow for pipe friction and altitude. Past that limit the job needs a submersible or a different design.
Can I use a pool pump on a wellpoint?
It is often tried and it rarely lasts. A pool pump is built to circulate water that is already at the pump, not to lift it from several metres down, and it has little tolerance for the sand a point produces. A proper jet pump costs less than replacing a pool pump twice.
What is dry run protection?
A switch or sensor that cuts the pump when there is no water going through it. Running dry destroys the mechanical seal and then the motor, usually within minutes. On a shallow point that can drop in summer, it is the most worthwhile thing you can add.
Does the pump need its own electrical circuit?
Not always, but it needs an earthed, protected supply and a weatherproof isolator within reach. An outdoor plug on a kitchen circuit will usually work for a small pump. An electrician should sign off anything more than that.
Pump work is quoted by the same providers listed on Wellpoint Installers SA who sink and service the point itself.
Related Services
Get the Best Quote, Fast
Client Reviews
Powered by leaderr
